ToolProof reads your posted G-code and confirms every tool, depth, and feed matches your setup — in 10 seconds, before you hit cycle start.
No credit card for trial · $600 per computer per year
| TOOL # | DESCRIPTION | RPM | FEED | Z-MAX |
|---|---|---|---|---|
| T1 | 0.750 FACE MILL | 5000 | 120.0 | -0.0625 |
| T2 | 0.500 FLAT ENDMILL | 8000 | 80.0 | -1.2500 |
| T3 | #4 CENTER DRILL | 4000 | 12.0 | -0.1500 |
| T5 | 0.375 DRILL | 3500 | 10.5 | -1.8750 |
| T8 | 0.250 BALL ENDMILL | 12000 | 60.0 | -0.8750 |
| T11 | 0.500 BALL ENDMILL | 10000 | 42.0 | -2.3125 ⚠ |
Every machine shop has this problem. Most just accept it as part of the job.
Pick a sample G-code file and watch ToolProof extract the tool list instantly.
Select a G-code file above to see the results
Parsing G-code...
Everything you need to verify tools before you run the program.
Drop any posted program, get the full tool list in seconds. Supports Mastercam, Alphacam, Fusion 360, GibbsCAM, and more.
See the maximum depth for every tool, including ball mills doing surface-finish flowlines. No more hovering over toolpath lines in Mastercam to find the lowest point.
Set ToolProof to watch a folder or USB drive. The tool list pops up the moment a new file appears. No clicking required.
No internet, no cloud, no account, no login. Runs on your machine, your data stays on your machine.
Export to PDF or print the tool list directly. Grab it and walk to your machine.
Feeds, speeds, coolant, work offsets, and Z-depths all on one page. Export to PDF or print and walk to your machine.
ToolProof doesn't just show the tool list on screen — it puts the setup in the operator's hands, automatically.
The moment a program lands on a watched drive, Print Station™ prints a setup ticket on a standard network thermal printer: every tool, description, max Z-depth, RPM, feed, and coolant call — on paper at the machine before the operator sits down.
One shared receipt printer serves every machine in the cell. Tickets queue and retry automatically when the printer is busy with another machine's job, and a printer problem never blocks verification — the on-screen popup always comes through.
The same setup ticket, delivered to the operator's phone. When ToolProof detects a program, the tool list and setup notes arrive as a mobile notification — read the setup from your pocket, anywhere in the shop. In development; ask about it when you request a quote.
Three steps. No complicated configuration.
Download for free. Run the installer. Done.
Tell ToolProof where your G-code lives: a folder, a USB drive, or just drag and drop.
Every tool number, description, and Z-depth appears instantly. Print it, export it, or just read it on screen.
Download free, get a 14-day trial license. Full features. No credit card to start.
Download for WindowsAn annual subscription for each computer running ToolProof. Updates and support are included — there are no tiers and no add-ons.
per computer, per year
Same-business-day quotes · PO and net-30 invoicing available
Rolling ToolProof out across the shop? Tell us how many computers you need and we'll put together a quote with PO/invoice terms.
If ToolProof doesn't work for your shop, email support@toolproof.dev within 30 days of purchase and we'll refund you in full. No forms, no friction.